PPP High Resolution testjpg2.JPG (22236 bytes) Made in the USA
  Home    Development    Dealers   About Us      
Broken Interlock Shaft Repair -  part no. PPP-BISR
broken shaft duo.jpg (23343 bytes) Broken Interlock Shaft Repair.jpg (10950 bytes)
Quickly remedy this time consuming interruption Part # PPP-BISR - pkg of 1
No tools needed to install. Keep one on hand for an emergency.
Repair broken shaft at your convenience or leave repair in place indefinitely.
Pinsetter (pictured below) worked with this repair for over 17 years.
RepairInstalled.JPG (75712 bytes)
Place long hook onto blocking finger and channel spring under trip lever.
Place spring into large bracket hole and pull onto forward cross conveyor mounting bracket.
Blocking finger must move freely on shaft. Loosen with WD-40 or similar product and work pivot point until free, if needed.
If Blocking finger does not adequately return to it’s uppermost position remove spring and shorten long hook 1/2" for more force, if needed.
Pinsetter Parts Plus LLC  Performance and Specialty Parts
Pinsetter parts for Brunswick equipped bowling centers