Jack Shaft Bearing - Non Self-Aligning
|Part # PPP-JSB|
|package of 2||Instructions pdf|
Get 2 bearings for less than the price of 1 self-aligning bearing
Most jack shaft replacements only need one self-aligning bearing and in some cases, where bearing entry-port alignment is good, both bearings can be non self-aligning.
The non-aligning bearing is easier to seat due to not swiveling while driven into bearing entry-port.
For best results, fully seat self-aligning bearing first, then install non-aligning bearing.
|Pinsetter Parts Plus LLC Performance and Specialty Parts|
|Pinsetter parts for Brunswick equipped bowling centers|